High Performance Current Sensing for Automation Applications
1-800-959-4014 | sales@nktechnologies.com

Heater Failure Detection

Heater Failure DetectionThe detection of a single phase heater failure by measuring the temperature is like measuring the effect rather than the cause. By installing an NK Technologies’ Current Operated Switch heater failure can be detected before cooling has had time to occur. The signal from the current sensor can be used to switch on a back-up heater, stop the equipment, alarm the equipment operator or trigger the appropriate action.

For 3-phase heaters installing an NK Technologies’ Current Transducer on each leg of a delta connected heating array is the best way to detect loss of one element. Unlike a typical induction motor, there will not be a substantial change in the current draw of the two adjacent phases when a heating element open circuits. The load has disappeared, and the work of heating will not be shared by the other elements. There will be a reduction in thermal output, which can take quite some time to detect with temperature sensors like thermocouples. A current transducer will identify the problem in milliseconds! Poor product quality can be prevented and large quantities of raw material can be saved by quick action.

Registration Required
Need an Account? Sign Up